3RD Gen Toyota Tacoma 2016-2023 Bilstein Fully Assembled 6112 Front Kit / Bilstein Rear 5100 Series Shocks, Rear 1.5" Leaf Spring Expansion Pack & U-Bolts, 47-309975, 24-186728

3RD Gen Toyota Tacoma 2016-2023 Bilstein Fully Assembled 6112 Front Kit / Bilstein Rear 5100 Series Shocks, Rear 1.5" Lift Leaf Spring Expansion Pack & U-Bolts Rear 

Upgrade your 3rd Generation Tacoma with the Bilstein 6112 front coil-overs and 5100 rear shocks for a smoother ride. Perfect for both on-road and off-road adventures, experience immediate results with this fully assembled kit. Expertly designed for maximum performance and comfort.

Kit Contents:

Quantity 1 - Bilstein Fully Assembled 6112 Kit with New Top Mounts

Quantity 2 - Bilstein Rear 5100 Series Shock Absorbers 

Quantity 2 – Excel Suspension Rear Leaf Spring Expansion Pack

Quantity 4 – U-Bolts with Hardware

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

Upgrade your Tacoma with our 1.5” Rear Leaf Spring Expansion Pack for improved ride, handling, and load-carrying capability. With numerous spring options, you can customize your vehicle for recreational or commercial use. By pairing these rear leaf springs with your Bilstein front and rear application your will experience optimal performance both on and off road.  

Toyota Tacoma 4x4 / Pre-Runner U-Bolts

• Includes Nuts and Washers
• Fits 4x4 and PreRunner 6 Lug only
• Does Not Fit 2 Wheel Drive with Leaf Springs Under the Axle
• 1" Longer than Stock Tacoma U Bolts

Fitment:

2005-2023 Toyota Tacoma

6112 Bilstein Fitment Notes:

·       4x4 Models can be set at .6", 1.08", 1.59", 2.15" and 2.46"  

·       4x2 Prerunner Models can be set at  .95, 1.43, 1.94 and 2.5 (5th clip not recommended)

·       Coil Compressor is NOT needed for this application.  

·       Designed for 4WD only

Circlip Location – Please see attached ride height chart

Circlip 5 - 2.46"

Circlip 4 - 2.15"

Circlip 3 - 1.59"

Circlip 2 - 1.08"

Circlip 1 - 0.6"        

• Optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control
• Adjustable in increments
• Direct Bolt on kit directly out of the box
• Limited Lifetime Warranty
• Free Shipping in the Lower 48 United States

WARNING: Cancer & Reproductive Harm -www.P65Warnings.ca.gov